How to Use the JCVAP Pockety?
and the devide with different insert for you to choose. Such as Ruby, ALN, SiC, Diamondium, Quartz and Titanium insert.
What are the benefits to the different inserts/chambers for the Pockety? (Quartz, ALN, SiC, Ruby, Titanium, Diamond Grade)
1. Quartz
Purity of Flavor: Quartz provides a very clean and pure taste, preserving the flavor of the concentrates.
Heat Retention: Good at retaining heat once it reaches the desired temperature.
Durability: Quite durable, though it can be prone to thermal shock if not handled properly.
2. AlN (Aluminum Nitride)
Efficient Heat Transfer: Excellent thermal conductivity, allowing for even and efficient heating.
Flavor Preservation: Maintains good flavor quality, though not as pure as quartz.
Durability: Highly durable and resistant to thermal shock.
3. SiC (Silicon Carbide)
Heat Distribution: Excellent heat distribution, leading to consistent vaporization.
Flavor Quality: Good flavor preservation, providing a smooth and enjoyable experience.
Durability: Extremely durable and resistant to high temperatures.
4. Ruby
Pure Taste: Provides a very pure and clean taste, similar to quartz.
Heat Retention: Excellent at retaining heat, allowing for efficient vaporization.
Aesthetic Appeal: Visually appealing due to its vibrant color.
Durability: Very durable, though it can be brittle if dropped or mishandled.
5. Titanium
Heat Transfer: Heats up quickly and efficiently.
Durability: Highly durable and resistant to damage.
Flavor: Some users may notice a slight metallic taste, though many high-quality titanium inserts are treated to minimize this.
6. Diamond Grade
Ultimate Flavor: Provides the best flavor preservation due to its purity and inertness.
Heat Retention: Excellent heat retention properties.
Durability: Extremely durable and resistant to thermal shock and physical damage.
High-end Experience: Considered a premium option due to its superior properties and cost.
How to fill water in the Pockety glass attachment?
Just pull it slowly right don’t rush it whatever, this little glass thing that’s on this side is for alignment purposes it doesn’t serve function. Fill glass with water just above the air-holes. Do not fill the water while the glass attached to the device.Align glass airfow hole on the front of the glass with chamber. push the glass to the base carefully.
Note: Full charge the device before first use. The charge icon is full means full charged.
Quick Start
1, Open/Close the device, hold down the power button 2 seconds.
2, Adjust screen brightness, Hold Power button down, then click button to increase or decrease brightness.
3, Switch mode, press the power button 4times to switch between concentrate mode and dry herb mode.
4, Swith temperature unit, clice the “+”, “-” button at the same time
5, Heat setting, click “+”, “-” button to increase or decrease setting temperature.
6, Use loading tool to place contents on the bottomsurface of the bowl.
7, Place glass ball carb cap on the top of chamber. Press down until snug, use the included chamber jacket & lether to keep it safe during use.
8, Initiate heat-up/exit, doubleclick the power button.Pulsinglight indicates heat-up mode is active.Screen will show real time temperature change.
9, Device will vibrate and light will flash twice when ready.Inhaling gently will produce the best results.
10, Use a cotton swab to clean the chamber after each use.Wipe gently in a circular motion.
Temperature Setting
Default:515℉/268°C
Lowest:350℉/176°C
Highest:650°F/343°C
Press the button one time in a row to switch the temperature,
Blue (465°F/240°C)
Green (495°F/257°C)
Red (515°F/ 268°C)
White (545°F/ 285°C)
Cleaning Heater
Submerge the chamber in 90%+ isopropyl alcohol for 20 minutes.Unscrew the top chamber and use a cotton swap to wipe it gently.
Cleaning Base
Preparation: remove glass and chamber.
Gently clean the gold contact points using cotton swabs soaked in isopropyl alcohol.
Clean the airpath between the chamber and the glass.
Do not allow water into the base at any time.
Cleaning Glass
Preparation: carefully remove glass from base.
1.Once removed,Submerge inlsopropyl alchohol.
2.After soaking,remove from isopropyl alcohol and rinse clean with water.(Make sure it’s rinsed thoroughly prior to use ).
Allow glass to thoroghly dry before re-attaching to base.
3,Do not re-insert glass onto base with water in the bottom chamber
GENERAL WARNINGS:
-Do not overfill the chamber.
-Do not blow or exhale hard into the glass.This will force waterinto the base.
-Do not store device with water in the glass.-Strong inhales may cause spillage and damage to your chamber.-Keep away from moisture and high humidity.-During use the chamber is hot (Burn Hazard).
-
$169.00 – $398.00
$152.10 – $358.20JCVAP Pockety Vaporizer Electric Dab Rig with Two Big 2600mAh Battery
Select options This product has multiple variants. The options may be chosen on the product page -
$175.00
$157.50JCVAP Pockety Electric Dab Rig with ICA 5D XXL Insert
Select options This product has multiple variants. The options may be chosen on the product page -
$181.00
$162.90JCVAP Pockety Electric Dab Rig with 5D XXL Chamber
Select options This product has multiple variants. The options may be chosen on the product page -
$175.00 – $184.60
$157.50 – $166.14JCVAP Pockety HerbCloud BallVape Vaporizer
Select options This product has multiple variants. The options may be chosen on the product page
