JCVAP 5D XXL Chamber for Peak Pro
$50.99
No-Questions-Asked 3-Day Refund
Get a full refund within three days of receiving your goods—no questions asked, if you’re not satisfied，If the time limit is exceeded, please contact our customer service or email us at service@jcvap.com with a reasonable explanation.
30-Day Normal Use, Free Replacement
If your goods are damaged within 30 days of normal use, contact our customer service for a prompt replacement.
7-Day Customer Service
Customer service is available seven days a week, except on major holidays..
Key Features
1.32%Larger than puffco 3DXL Chamber ，and more vapor，
1.Enhanced Flavor
2.Easy to Disassemble, Easy to Install, Cost-Effective
3.Fully Cleanable for a Healthier Experience
4.Turbocharged Cap, Adjustable Airflow
5.Glazed Ceramic 5D heater，heating from the bottom and sidewalls.
Note:This product don’t fit the Pockety,if you want to pick up the Pockety 5D xxl chamber ,please click here
5 reviews for JCVAP 5D XXL Chamber for Peak Pro
| 5 star | 60% | |
| 4 star | 40% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
RBA 5D XXL Chamber :
1.Enhanced Flavor , Larger and deeper than puffco peak pro 3dxl chamber
We are dedicated to providing the most exceptional taste, and the RBA 5D Chamber heat from three directions and presents an unmatched delight for your taste buds.
A larger and deeper volume can produce more vapor.
2.Easy to Disassemble, Easy to Install, Cost-Effective
Innovative design ensures effortless disassembly and installation, saving you from costly repair expenses .
3.Fully Cleanable for a Healthier Experience
The easily cleanable structure guarantees that you always enjoy the purest vaping experience, helping you maintain your well-being.
4.Turbocharged Cap, Adjustable Airflow
The unique turbocharged cap design combined with 1-2 pearls delivers richer vapor and allows for airflow adjustment, allowing you to immerse in dense clouds.
5.Glazed Ceramic 3D heater
Heating from bottom and side walls with glazed ceramic heater，without an insert dropped in.
NOTE:This product only fit the peak pro，do not fit JCVAP Pockety and without inserts dropped in.
| Weight | 50 g |
|---|---|
| caps | With xxl ball cap, With xxl turbo spinner cap |
| Warehouse |
Q & A
Hello,yes it comes with preassembled
Yes we have adjusted the length of the pins,can be well adapted to peak pro.
Have you tried removing and cleaning the chamber, as well as the gold connection pins between the base and the chamber? If not, please clean them, and if you are unable to rebuild it, check the links below for guidance on how to rebuild the 5D XXL Chamber.
The video on how to rebuild the 5D XXL heater
The video on how to rebuild the 5D XXL Chamber
Don’t worry—this issue usually occurs when the device overheats. Simply allow the Peak Pro to cool down for a while, and normal functionality and charging should resume. If the red and white blinking light issue persists, you can try updating the firmware to address connection issues with the chamber.Typically, after updating the firmware, it works perfectly.
Related products
-
Sale!
-
Sale!$56.09
JCVAP Pockety 5D XXL Chamber
-
Sale!
-
Sale!Original price was: $25.99.$22.09Current price is: $22.09.
Repair Kit for Pro Atomizer
-
Sale!
$143.65 – $338.30JCVAP Pockety Vaporizer Electric Dab Rig with Two Big 2600mAh Battery
-
Sale!$114.75 – $119.00
JCVAP Poby L Portable Electric Dab Rig
-
Sale!$69.99 – $95.15
Herbcloud Quartz BallVape Chamber for Pockety
works great so far will probablky buy more products
Solid replacement for the 3dxl coil and it is rebuildable.
Works really, really well. I really don’t know why you’d want to only heat the sides of your XL chamber. Trying to get a big rip, here… well, JCVAP nailed it.
Couple things:
Only use the JCVAP silicone sleeve. The current Puffco and Tuff Tether chamber sleeves do not cover the gap between the metal housing and the top ceremic ring on the Jcvap chambers and you will get a red/white light error. The Jcvap sleeve does cover the gap to make an airtight seal, and the grommet/grommet ring is optional. Don’t have to cut anything to use the sleeve with a different tether or no tether.
If you rebuild the atomizer, make sure you tighten the upper and lower sections of the chamber housing fully to make an airtight seal.
If you do not use the Jcvap chamber sleeve and make sure it’s properly sealed the gap mentioned above, you’ll likely get a red/white light error. Atomizer is amazing, calibration is good.
5 stars. Better than Puffco 3DXL when properly installed.
Have some tips
Thank you Del for share the using experience and 5 star review.It’s really helpful for other users.
Updating my initial review as I’ve had success in working through some red white light issues. After rebuilding the atomizer a 2nd time I realized that you can OVER tighten the Jcvap chamber on the Puffco. By correcting this by gently untightening, the chamber has performed well.
The additional surface area is welcome. Battery usage up slightly, but manageable. Rebuilding the atomizer is surprisingly straight forward, but not exactly easy. What really impressed me the most was the robust assembly because I actually full on dropped the ceremic heater on the floor from about 4 feet and it didn’t break. I couldn’t believe it. The wire connections seem pretty sturdy as well. The pin mechanisms that hold the wires where you need them are fiddly but also manageable and seem functionally reusable based on my experience as a complete atomizer rebuilding need.
Am recommending this as a solid replacement for 3DXL chambers, but I would like to see the machining on the chamber heatsink/fins edges chamferred more. I cut myself just a bit on them while unscrewing the chamber from the Puffco base.
Updating my initial review as I’ve had success in working through some red white light issues. After rebuilding the atomizer a 2nd time I realized that you can OVER tighten the Jcvap chamber on the Puffco. By correcting this by gently untightening, the chamber has performed well.
The additional surface area is welcome. Battery usage up slightly, but manageable. Rebuilding the atomizer is surprisingly straight forward, but not exactly easy. What really impressed me the most was the robust assembly because I actually full on dropped the ceremic heater on the floor from about 4 feet and it didn’t break. I couldn’t believe it. The wire connections seem pretty sturdy as well. The pin mechanisms that hold the wires where you need them are fiddly but also manageable and seem functionally reusable based on my experience as a complete atomizer rebuilding need.
Am recommending this as a solid replacement for 3DXL chambers, but I would like to see the machining on the chamber heatsink/fins edges chamferred more. I cut myself just a bit on them while unscrewing the chamber from the Puffco base.