Step 1 – Open the Water Base
Hold the main body and rotate the bottom base counterclockwise to unlock and open the water chamber.
Step 2 – Fill with Water
Pour clean water into the base until it reaches the recommended water level line. Do not overfill.
Step 3 – Secure the Base
Reattach the base and rotate clockwise until fully tightened and sealed.
Step 4 – Add Shisha Material
Place your preferred shisha tobacco or herbal mixture into the metal pot.
Note: Do not block the air holes with tobacco.
Step 5 – Install the Stainless Steel Cover
Place the perforated stainless steel plate on top of the tobacco pot.
Step 6 – Open the Heating Chamber
Pull the top lid lever to open the heating chamber.
Step 7 – Insert the Tobacco Pot
Place the prepared pot into the heating chamber carefully.
Step 8 – Close the Heating Chamber
Close the lid firmly until it locks in place.
Step 9 – Power On
Press and hold the power button for 3 seconds to turn on the device.
Step 10 – Select Temperature
Choose your desired heating level on the control panel:
Low: 180°C
Medium: 200°C
High: 220°C
Wait 15–20 seconds until the indicator light turns green.
Step 11 – Enjoy Your Session
Inhale smoothly through the hose mouthpiece and enjoy clean, charcoal-free shisha vapor.
⚠️ Safety Notes
Do not operate without water in the base
Keep away from children
Clean the device after each session
Use only recommended e-liquid or shisha material
Allow the unit to cool before disassembly
