ICA Fully Built Chamber with Clear Quartz Insert and Extra Hot Heater
The ICA(Insert Changeable Atomzier) Chamber allow us to change your insert withing seconds.Only thing need to do is screw the top part and replace the insert.
When setting 550℉,Instantaneous maximum temperature 592℉(2 seconds)，Stable Temperature 480℉ to 530℉
1 x ICA empty chamber
1 xExtra hot heater
1 x Top ceramic ring
1 x Quartz Insert
Quartz insert outside diameter is 0.8mm smaller than top ceramic ring,there possible a little wobbles around but it’s normal,Basically meet the use requirements.
How to replace insert?
- Wash you hand clean.
- Please be sure to keep the atomizer vertical(So can keep the sensor don’t move and not fall off),Unscrew the top chamber.
- Replace the insert
- Hook the ceramic ring with your index finger to prevent it from moving or falling when screw it.When screw in 2 turns,Use a little force to press the insert bottom with your finger to prevent the bottom silicone pad from twisting,screw bottom chamber until it fully screwed.
How to fix the problem ICA chamber flash Red-Blue-Red-Blue light or White light?
Because the middle pin has no elasticity,it usually will cause the two side pins can’t touch well.Only thing need to do is drag out the side pins a little .Issue usually can be solved!
Out of stock
9 reviews for ICA Fully Built Chamber with Clear Quartz Insert and Extra Hot Heater